XRT Xtreme Rifle Threat Body Armor – RF2++

Description

XRT Special Threat Plate

The XRT special threat body armor plate is the perfect bridge between lightweight RF2/III+ plates and high-strength–but heavier–Level RF3/4 armor. The XRT covers a wide range of rifle rounds from AR and AK rounds and also many powerful 30 caliber cartridges, without adding unnecessary weight or cost.

At just 5.3 pounds (10X12 Shooter’s Cut) or 5.9 pounds (size SAPI medium) and only 0.75″ thick, this multi-curve RF2++ special threat plate also defeats some of the most prevalent and dangerous rifle rounds worldwide.

The XRT Special Threat Plate goes so far beyond RF2, it competes with Level 4/RF3. XRT also stands up to multiple impacts from M855A1, 7.62X39 API-BZ, M80A1. It even defeats the 7.62X54R B-32 API, taking it far beyond the traditional Level 3+ or RF2 body armor plate.

Is XRT Special Threat Body Armor Level RF1?

The XRT Special Threat Plate bests the NIJ RF1 standard by a mile. RF1 requires multiple M80, M193, and also 7.62X39 MSC impacts. These rounds are soundly defeated by plates made of only UHMWPE. Properly-made UHMWPE plates do not require any ceramic to defeat RF1. But because the world is filled with penetrator and armor-piercing rounds, NIJ also made RF2 and RF3.

What about RF2?

The XRT Special Threat plate also bests the RF2 standard with plenty of breathing room. RF2’s meaningful addition over RF1 is the inclusion of M855; the famous ‘green tip’ 5.56 penetrator round. But RF2 also missed modern domestic threats like M855A1 and common foreign threats like 7.62X39 API-BZ. Despite RF2 offering a more robust testing category for sub-Level 4 plates, there are plenty of threats that defeat typical RF2 plates that don’t require the weight or cost of Level 4/RF3 plates.

High power domestic rounds like 5.56 M855A1 and also 7.62X51 M80A1 are available online and easily defeat most plates below Level 4/RF3. Soviet 7.62X54R API B-32 is far more common than you might think in the United States and across the world, and easily bests most RF2 plates. However, M2AP at 300WM velocities at extreme close range requires a plate to be built substantially beyond what’s necessary to defeat many other common high-threat rounds. The XRT Special Threat RF2++ plate splits the difference. The XRT saves almost 2.5 lbs of weight by sacrificing lab-spec velocity M2AP protection without giving up 7.62X54R B-32 API, M80A1, M855A1, and also more armor-piercing and penetrator cartridges.

For those facing high threat intermediate rifle cartridges from AR-15 and/or also AK-47 platforms–penetrator or not–the XRT Xtreme Rifle Threat Plate is an RF2++ plate that approaches Level 4/RF3 armor territory without the extreme weight of a Level 4 plate.

Whether defending from enemies foreign or domestic, the XRT provides extreme rifle-rated protection at a weight and price you can’t afford not to have.

If you want to learn more about the XRT, you can read more about What the XRT Special Threat Plate is on our blog.

XRT Special Threat Plate Body Armor Spec Sheet

Standalone Threats

XRT Armor-Piercing Incendiary Threats

• 7.62x54R API (Defeats 1+ round) XRT Ballistic Report vs. 7.62x54R API
• 7.62X39 API-BZ (Defeats 3+ rounds) XRT Ballistic Report vs. 7.62X39 API-BZ

XRT Penetrator Threats

• 7.62×51 M80A1 (Defeats 3+ Rounds) XRT Ballistic Report vs. M80A1
• 5.56X45 M855A1 (Defeats 3+ rounds) XRT Ballistic Report vs. M855A1
• 5.56X45 M855 (Defeats 3+ rounds) XRT Ballistic Report vs. M855 Green Tip
• 5.56X45 M193 (Defeats 3+ rounds) XRT Ballistic Report vs. M193
• 7.62X39 Type 56 MSC (Defeats 3+ rounds)

XRT FMJ Threats

• 7.62×51 M80 NATO Steel (Defeats 3+ Rounds) XRT Ballistic Report vs. M80 NATO
• 7.62X39
• 5.56X45 M193
• And more

XRT Details:

• Stand Alone Body Armor
• Full Edge-to-Edge ballistic protection
• Warranty: 5 Year Manufacturer’s Warranty
• Armor Shape: Multi-Curve
• Armor Cut: SAPI/ESAPI-Cut & also Shooter’s Cut

XRT Dimensions:

• Size & Weight (-/+ 0.2 tolerance):
• Size 10X12 (Nominal) Shooter’s Cut: 9.5″ x 11.5″ – 5.3 lbs.
• Size Medium SAPI: 9.5″ x 12.5″ – 5.9 lbs.

RMA XRT Special Threat Engineering

• Thickness: 0.75″
• Armor Build: Ceramic & UHMWPE
• 600 Denier Water Resistant Cover
• Special Threat Multi-Hit Tested by an NIJ Certified Laboratory
• Free Incident Replacement (If our armor saved your life, please let us know!)
• Made in Centerville, IA – USA

XRT Plate Carrier Compatibility

As a 9.5″x12.5″ or nominal 10×12 (Shooter’s Cut) multi-curve hard armor plate, the XRT will fit into a majority of plate carriers sized with medium armor plate pockets. So, here are some of the best plate carriers that we recommend with the XRT:

• 0331 Tactical Rift Plate Carrier
• 0331 Tactical Sierra Plate Carrier
  
• Crye JPC 2.0 – Medium
• Agilite K19
• Agilite K Zero

RMA also has specifically curated XRT body armor kits paired with the JPC 2.0 and Agilite K19.

Warranty:

• RMA Return Policy
• RMA Hard Armor Warranty Policy

Legal

PLEASE NOTE THAT BY PLACING AN ORDER YOU AGREE TO COMPLY WITH ALL LOCAL, STATE, AND FEDERAL LAWS REGARDING BODY ARMOR.

18 U.S. Code § 931. United States law restricts possession of body armor for felons convicted of a crime of violence (as defined in 18 U.S. Code § 16).

Many U.S. states also have penalties for possession or use of body armor by felons. By purchasing body armor from RMA Armament, Inc. or employees of RMA Armament, Inc., you are also certifying that you have not been convicted of any crime that would restrict you from being able to purchase or possess body armor under any Federal or State laws.

***DUE TO THE LIFE-SAVING NATURE OF THIS PRODUCT, ALL SALES ARE ALSO FINAL***